APPENDICES TO ANNEX I (Part-M)
Annex I (Part-M) · Continuing Airworthiness · Regulation (EU) No 1321/2014
Appendix I Continuing airworthiness management contract
When an owner or operator contracts in accordance with point M.A.201 a CAMO or CAO to carry out continuing airworthiness management tasks, upon request…
GM to Appendix I to Part-M — Continuing airworthiness management contract
An operator should establish adequate coordination between flight operations and the CAO/CAMO to ensure that both will receive all the necessary…
Appendix II Authorised Release Certificate — EASA Form 1
These instructions relate only to the use of the EASA Form 1 for maintenance purposes.
AMC to Appendix II to Part-M — Use of the EASA Form 1 for maintenance
The following formats of an issued EASA Form 1 or equivalent certificate are acceptable:
GM to Appendix II to Part-M — Use of the EASA Form 1 for maintenance
EASA FORM 1 BLOCK 12 ‘REMARKS’ The EASA Form 1 identifies the airworthiness status of an aircraft component in relation to the work being certified.
Appendix III Airworthiness Review Certificate — EASA Form 15
Appendix III — Airworthiness Review Certificate — EASA Form 15
EASA Form 15b
[MEMBER STATE] A Member of the European Union (*) AIRWORTHINESS REVIEW CERTIFICATE (ARC) ARC reference:
EASA Form 15a
[MEMBER STATE] A Member of the European Union (*) AIRWORTHINESS REVIEW CERTIFICATE (ARC) ARC reference:
Appendix IV Class and rating system for the terms of approval of maintenance organisations referred to in Annex I (Part-M), Subpart F
Appendix IV — Class and rating system for the terms of approval of maintenance organisations referred to in Annex I (Part-M), Subpart F 1.
Appendix V Maintenance Organisation Certificate referred to in Annex I (Part-M), Subpart F – EASA Form 3-MF
Page 1 of 2 [MEMBER STATE (*)] A Member of the European Union (**) MAINTENANCE ORGANISATION CERTIFICATE Reference:
AMC to Appendix V to Part-M — Maintenance Organisation Approval referred to in Annex I (Part-M) Subpart F
The following fields on page 2 ‘Maintenance Organisation Approval Schedule’ of the maintenance organisation approval certificate should be completed as…
Appendix VI Continuing airworthiness management organisation certificate referred to in Annex I (Part-M) Subpart G – EASA Form 14-MG
[MEMBER STATE (*)] A Member of the European Union (**) CONTINUING AIRWORTHINESS MANAGEMENT ORGANISATION CERTIFICATE Reference:
AMC to Appendix VI to Part-M — Continuing Airworthiness Management Organisation Approval referred to in Annex I (Part-M) Subpart G
The following fields on page 2 ‘Continuing Airworthiness Management Organisation Approval Schedule’ of the continuing airworthiness management…
Appendix VII Complex Maintenance Tasks
The following constitutes the complex maintenance tasks referred to in point M.A.801(b):
AMC to Appendix VII — Complex Maintenance Tasks
The sentence ‘suitably approved or authorised welder’ contained in Appendix VII, paragraph 3(c), means that the qualification should meet an officially…
Appendix VIII Limited Pilot-owner Maintenance
In addition to the requirements laid down in Annex I (Part-M), the following basic principles are to be complied with before any maintenance task is…
AMC to Appendix VIII — Limited Pilot-owner Maintenance
The lists here below specify items that can be expected to be completed by an owner who holds a current and valid pilot licence for the aircraft type…
Consolidated from the EASA Easy Access Rules (revision 2 Sep 2025, extracted 17 Aug 2026) for convenience. Not the official publication — verify against the Official Journal of the European Union and the EASA publications before operational use.
Metis opens with Avioverse in October 2026 · request early access.