IRImplementing rule
2. Type Training Examination and Assessment
The type training certificate template shall be used for recognition of completion of either the examination of the theoretical element (training included) or the assessment of the practical element (training included), or both elements of the type rating training course (Appendix III to Annex III (Part-66), points 1(a) and (b)). The certificate shall indicate the airframe/engine combination for which the training was imparted. The appropriate references shall be deleted as applicable and the course type box shall detail whether only the theoretical elements or the practical elements were covered or whether theoretical and practical elements were covered. The training certificate shall clearly identify if the course is a complete course or a partial course (such as an airframe or powerplant or avionic/electrical course) or a difference course based upon the applicant previous experience, for instance A340 (CFM) course for A320 technicians. If the course is not a complete one, the certificate shall identify whether the interface areas have been covered or not. The same form shall be used for the recognition of completion of the aircraft type evaluation (point 66.A.45(d) of Annex III (Part-66) and point 5 of Appendix III to that Annex). EASA Form 149a shall be used for training and examinations conducted by a training organisation approved in accordance with Annex IV (Part-147). EASA Form 149b shall be used for type training examinations and type evaluations conducted by the competent authority or as recognition of completion of aircraft type training approved through the direct approval procedure of point 66.B.130 of Annex III (Part-66).
| Page 1 of 1 CERTIFICATE OF RECOGNITION Reference: [MEMBER STATE CODE (*)].147.[XXXX].[YYYYY] The certificate of recognition is issued to: [NAME] [DATE and PLACE OF BIRTH] By: [COMPANY NAME AND ADDRESS] Reference: [MEMBER STATE CODE (*)].147.[XXXX] a maintenance training organisation approved to provide training and conduct examinations within its approval schedule and in accordance with Annex IV (Part-147) to Commission Regulation (EU) No 1321/2014. This certificate attests that the above-named person has successfully passed the theoretical (**) and/or the practical elements (**) of the approved aircraft type training course; or completed the aircraft type evaluation (**) stated below in compliance with Regulation (EU) 2018/1139 of the European Parliament and of the Council and with Commission Regulation (EU) No 1321/2014. [AIRCRAFT TYPE TRAINING COURSE (**)] [START and END DATES]/[LOCATION] [SPECIFY THE THEORETICAL/PRACTICAL ELEMENTS] or [AIRCRAFT TYPE EVALUATION (**)] [END DATE]/[LOCATION] |
|---|
| Date: .................................................................................................................................................................. Signed: ............................................................................................................................................................... For: [COMPANY NAME] |
EASA Form 149a Issue 1 (*) Or ‘EASA’, if EASA is the competent authority. (**) Delete as appropriate. Possible cases: completely attended and passed the theoretical elements and positively assessed on the practical elements of the type training course; or completely attended and passed only the theoretical elements; or positively assessed on the practical elements; or positively completed the aircraft type evaluation.
| Page 1 of 1 CERTIFICATE OF RECOGNITION Reference: [MEMBER STATE CODE(*)].CAA.[XXXX].[YYYY] The certificate of recognition is issued to: [NAME] [DATE and PLACE OF BIRTH] By: [COMPETENT AUTHORITY NAME] [COMPETENT AUTHORITY ADDRESS] after having conducted examination in accordance with Section B, Subpart C of Annex III (Part-66) to Commission Regulation (EU) No 1321/2014 or according to the procedure for the direct approval of aircraft type training of point 66.B.130 of Annex III (Part-66) to Commission Regulation (EU) No 1321/2014. This certificate attests that the above-named person has successfully passed the theoretical (*) and/or the practical elements (*) of the approved aircraft type training course; or completed the aircraft Type Evaluation (*) stated below in compliance with Regulation (EU) 2018/1139 of the European Parliament and of the Council and with Commission Regulation (EU) No 1321/2014. [AIRCRAFT TYPE TRAINING COURSE (*)] [START and END DATES]/[LOCATION] [SPECIFY THE THEORETICAL/PRACTICAL ELEMENTS] or [AIRCRAFT TYPE EVALUATION (*)] [END DATE]/[LOCATION] |
|---|
| Date: .................................................................................................................................................................. Signed: ............................................................................................................................................................... For: [COMPETENT AUTHORITY NAME] |
EASA Form 149b Issue 1 (*) Delete as appropriate. Possible cases: completely attended and passed the theoretical elements and positively assessed on the practical elements of the type training course; or completely attended and passed only the theoretical elements; or positively assessed on the practical elements; or positively completed the aircraft type evaluation.
IR — Regulation (EU) No 1321/2014 · Regulation (EU) 2019/1383 · Continuing Airworthiness Easy Access Rules · EAR revision 2 Sep 2025