Skip to content

A gradual release of Avioverse begins in October 2026. Request early access →

CS 25.1301 Function and installation

Large Aeroplanes (CS-25) · CS-25 · EAR revision 26 Jan 2023

IRImplementing rule

CS 25.1301Function and installation

(See AMC 25.1301)

(a)Each item of installed equipment must –

(1)Be of a kind and design appropriate to its intended function;

(2)Be labelled as to its identification, function, or operating limitations, or any applicable combination of these factors. (See AMC 25.1301(a)(2).)

(3)Be installed according to limitations specified for that equipment.

(b)Electrical wiring interconnection systems must meet the requirements of subpart H of this CS-25.

[Amdt 25/2]

[Amdt 25/5]

IR · CS 25.1301 — CS-25 · ED Decision 2008/006/R · CS-25 Easy Access Rules · EAR revision 26 Jan 2023

AMCAcceptable means of compliance

AMC 25.1301(a)(2)Function and installation

Show the text

When pipelines are marked for the purpose of distinguishing their functions, the markings should be such that the risk of confusion by maintenance or servicing personnel will be minimised. Distinction by means of colour markings alone is not acceptable. The use of alphabetic or numerical symbols will be acceptable if recognition depends upon reference to a master key and any relation between symbol and function is carefully avoided. Specification ISO.12 version 2ED 1987 gives acceptable graphical markings.

[Amdt 25/5]

AMC · AMC 25.1301(a)(2) — CS-25 · ED Decision 2008/006/R · CS-25 Easy Access Rules · EAR revision 26 Jan 2023

All rules in SUBPART F – EQUIPMENT

Consolidated from the EASA Easy Access Rules (revision 26 Jan 2023, extracted 17 Aug 2026) for convenience. Not the official publication — verify against the Official Journal of the European Union and the EASA publications before operational use.

Ask Metis about CS 25.1301 →

Metis opens with Avioverse in October 2026 · request early access.