GM3 Article 2(2) Scope

ACTIVITIES UPON AIRCRAFT ARRIVAL The following activities take place before and after an aircraft is parked at the stand:

(a)prior to aircraft arrival:

(1)checking the aircraft stand for any FOD;

(2)checking the conditions of the surface stand for any ice, snow, etc.;

(3)preparing the necessary GSE, chocks and cones outside the equipment restraint area;

(4)ensuring that the necessary personnel are available for aircraft arrival activities and remain outside the aircraft manoeuvring path and within the safety zones;

(b)after the aircraft has been parked:

(1)securing the aircraft on the ground by putting chocks on the aircraft wheels and setting out safety cones to mark the equipment restraint area;

(2)performing a walkaround upon aircraft arrival to inspect the aircraft fuselage, doors and engine cowlings/propellers for any damage;

(3)giving clearance for the positioning of the necessary GSE (air conditioning unit, ground power unit, passenger stairs or boarding bridges, etc.).