ETSO-C158

AERONAUTICAL MOBILE HIGH FREQUENCY DATA LINK (HFDL) EQUIPMENT

1 Applicability

This ETSO gives the requirements which Aeronautical Mobile High Frequency Data Link (HFDL) Equipment that are manufactured on or after the date of this ETSO must meet in order to be identified with the applicable ETSO marking.

2 Procedures

- 2.1 General

Applicable procedures are detailed in CS-ETSO Subpart A.

- 2.2 Specific

None.

3 Technical Conditions

- 3.1 Basic

3.1.1 Minimum Performance Standard

Standards set forth in the Radio Technical Commission for Aeronautics (RTCA) Document DO-265, Minimum Operational Performance Standards for Aeronautical Mobile High Frequency Data Link (HFDL)', dated 14/12/2000.

3.1.2 Environmental Standard

See CS-ETSO Subpart A paragraph 2.1.

- 3.1.3 Computer Software

See CS-ETSO Subpart A paragraph 2.2.

- 3.1.4 Electronic Hardware Qualification

See CS-ETSO Subpart A paragraph 2.3.

3.2 Specific

- 3.2.1 Failure Condition Classification

See CS-ETSO Subpart A paragraph 2.4.

Failure of the function defined in paragraph 3.1.1 of this ETSO has been determined to be a minor failure condition.

4 Marking

- 4.1 General

Marking as detailed in CS-ETSO Subpart A paragraph 1.2.

- 4.2 Specific

None.

5 Availability of Referenced Document

See CS-ETSO Subpart A paragraph 3. [Amdt ETSO/7]