ETSO-C141

AIRCRAFT FLUORESCENT LIGHTING BALLAST/FIXTURE EQUIPMENT

1 Applicability

This ETSO gives the requirements that fluorescent lighting ballast/fixture equipment that are manufactured on or after the date of this ETSO must meet in order to be identified with applicable ETSO marking.

2 Procedures

- 2.1 General

Applicable procedures are detailed in CS-ETSO Subpart A.

- 2.2 Specific

None.

3 Technical Conditions

- 3.1 Basic

- 3.1.1 Minimum Performance Standard

Standards set forth in the Society of Automotive Engineers, Inc. (SAE), Aerospace Standard (AS) 4914, Revision A 'Aircraft Fluorescent Lighting Ballast/Fixture Safety Design Standard,' dated May 1999.

- 3.1.2 Environmental Standard

See CS-ETSO Subpart A paragraph 2.1.

- 3.1.3 Computer Software None

- 3.2 Specific

None

4 Marking

- 4.1 General

Marking is detailed in CS-ETSO Subpart A paragraph 1.2.

- 4.2 Specific

None

- 5 Availability of Referenced Document

See CS-ETSO Subpart A paragraph 3.