ETSO-2C500a

1 Applicability

This ETSO gives the requirements which multi-mode receivers (ILS/MLS/GPS) that are manufactured on or after the date of this ETSO must meet in order to be identified with applicable ETSO marking.

2 Procedures

- 2.1 General

Applicable procedures are detailed in CS-ETSO Subpart A.

- 2.2 Specific

None.

3 Technical Conditions

- 3.1 Basic

- 3.1.1 Minimum Performance Standard Standards set forth in EUROCAE document ED-88 dated August 1997.

- 3.1.2 Environmental Standard

See CS-ETSO Subpart A paragraph 2.1

- 3.1.3 Computer Software

See CS-ETSO Subpart A paragraph 2.2

- 3.2 Specific

None

4 Marking

- 4.1 General

Marking is detailed in CS-ETSO Subpart A paragraph 1.2

- 4.2 Specific

None.

5 Availability of Referenced Document

See CS-ETSO Subpart A paragraph 3.

MULTI-MODE RECEIVER (ILS/MLS/GPS)

ED Decision 2003/10/RM