Skip to content

A gradual release of Avioverse begins in October 2026. Request early access →

AMC1 SECTION III — (a)(1)

SPECIFIC REQUIREMENTS FOR PROVIDERS OF FLIGHT PROCEDURE DESIGN SERVICES · Regulation (EU) 2017/373 · EAR revision 12 Mar 2025

AMCAcceptable means of compliance

AMC1 SECTION III — (a)(1)

SYSTEM OF DESIGNATORS The system of designators should:

(a)make a clear distinction between:

(1)departure routes and arrival routes;

(2)departure or arrival routes and other ATS routes; and

(3)routes requiring navigation by reference to ground-based radio aids or self-contained airborne aids, and routes requiring navigation by visual reference to the ground;

(b)be compatible with ATS and aircraft data processing and display requirements;

(c)be of utmost brevity in its operational application;

(d)avoid redundancy; and

(e)provide sufficient possibility for extension to cater for any future requirements without the need for fundamental changes.

AMC — Regulation (EU) 2017/373 · ED Decision 2020/008/R · ATM/ANS Easy Access Rules · EAR revision 12 Mar 2025

All rules in Appendix 1 — REQUIREMENTS FOR AIRSPACE STRUCTURES AND FLIGHT PROCEDURES CONTAINED THEREIN

Consolidated from the EASA Easy Access Rules (revision 12 Mar 2025, extracted 17 Aug 2026) for convenience. Not the official publication — verify against the Official Journal of the European Union and the EASA publications before operational use.

Ask Metis about AMC1 SECTION III — (a)(1) →

Metis opens with Avioverse in October 2026 · request early access.