Skip to content

A gradual release of Avioverse begins in October 2026. Request early access →

SUBPART C — SPECIFIC ORGANISATION REQUIREMENTS FOR SERVICE PROVIDERS OTHER THAN ATS PROVIDERS (ATM/ANS.OR.C)

ANNEX III COMMON REQUIREMENTS FOR SERVICE PROVIDERS (Part-ATM/ANS.OR) · Air Traffic Management / Air Navigation Services · Regulation (EU) 2017/373 · ATM/ANS.OR.C.001 – ATM/ANS.OR.C.005

On this page
  1. ATM/ANS.OR.C.001 Scope

    This Subpart establishes the requirements to be met by the service provider other than the air traffic services provider, in addition to the requirements…

  2. ATM/ANS.OR.C.005 Safety support assessment and assurance of changes to the functional system

    For any change notified in accordance with point ATM/ANS.OR.A.045(a)(1), the service provider other than the air traffic services provider shall:

    GM1 ATM/ANS.OR.C.005(a)(1) Safety support assessment and assurance of changes to the functional system

    GM2 ATM/ANS.OR.C.005(a)(1) Safety support assessment and assurance of changes to the functional system

    GM3 ATM/ANS.OR.C.005(a)(1) Safety support assessment and assurance of changes to the functional system

    GM4 ATM/ANS.OR.C.005(a)(1) Safety support assessment and assurance of changes to the functional system

    GM5 ATM/ANS.OR.C.005(a)(1) Safety support assessment and assurance of changes to the functional system

    GM6 ATM/ANS.OR.C.005(a)(1) Safety support assessment and assurance of changes to the functional system

    AMC1 ATM/ANS.OR.C.005(a)(2) Safety support assessment and assurance of changes to the functional system

    AMC2 ATM/ANS.OR.C.005(a)(2) Safety support assessment and assurance of changes to the functional system

    AMC3 ATM/ANS.OR.C.005(a)(2) Safety support assessment and assurance of changes to the functional system

    AMC4 ATM/ANS.OR.C.005(a)(2) Safety support assessment and assurance of changes to the functional system

    AMC5 ATM/ANS.OR.C.005(a)(2) Safety support assessment and assurance of changes to the functional system

    AMC6 ATM/ANS.OR.C.005(a)(2) Safety support assessment and assurance of changes to the functional system

    GM1 ATM/ANS.OR.C.005(a)(2) Safety support assessment and assurance of changes to the functional system

    GM2 ATM/ANS.OR.C.005(a)(2) Safety support assessment and assurance of changes to the functional system

    GM3 ATM/ANS.OR.C.005(a)(2) Safety support assessment and assurance of changes to the functional system

    AMC1 ATM/ANS.OR.C.005(b)(1) Safety support assessment and assurance of changes to the functional system

    GM1 ATM/ANS.OR.C.005(b)(1) Safety support assessment and assurance of changes to the functional system

    GM2 ATM/ANS.OR.C.005(b)(1) Safety support assessment and assurance of changes to the functional system

    AMC1 ATM/ANS.OR.C.005(b)(2) Safety support assessment and assurance of changes to the functional system

    GM1 ATM/ANS.OR.C.005(b)(2) Safety support assessment and assurance of changes to the functional system

  3. GM1 to AMC2 ATM/ANS.OR.C.005(a)(2) Safety support assessment and assurance of changes to the functional system

    COMPLETENESS OF THE ARGUMENT (a) Sufficiency of specifications The way the service specification is arrived at is not of particular interest in a safety…

  4. GM1 to AMC6 ATM/ANS.OR.C.005(a)(2) Safety support assessment and assurance of changes to the functional system

    ASSURANCE — SOFTWARE ASSURANCE PROCESS (a) The term ‘correct and complete software verification’ is understood to be all software safety requirements…

  5. GM2 to AMC6 ATM/ANS.OR.C.005(a)(2) Safety support assessment and assurance of changes to the functional system

    ASSURANCE — SOFTWARE ASSURANCE LEVELS (a) The assurance required by AMC6 ATM/ANS.OR.C.005(a)(2) can be provided with different levels of confidence…

  6. GM3 to AMC6 ATM/ANS.OR.C.005(a)(2) Safety support assessment and assurance of changes to the functional system

    ASSURANCE — SOFTWARE ASSURANCE LEVELS ALLOCATION The process to allocate a SWAL to a software consistently with its foreseen criticality, as identified…

  7. GM4 to AMC6 ATM/ANS.OR.C.005(a)(2) Safety support assessment and assurance of changes to the functional system

    ASSURANCE — EXAMPLES OF EXISTING INDUSTRIAL STANDARDS (a) The service provider is responsible for the definition of the software assurance processes.

Consolidated from the EASA Easy Access Rules (revision 12 Mar 2025, extracted 17 Aug 2026) for convenience. Not the official publication — verify against the Official Journal of the European Union and the EASA publications before operational use.

Ask Metis about ATM/ANS.OR.C.001 – ATM/ANS.OR.C.005 →

Metis opens with Avioverse in October 2026 · request early access.

ShareLinkedInX