Skip to content

A gradual release of Avioverse begins in October 2026. Request early access →

FCL.740 Validity and renewal of class and type ratings

ANNEX I (Part-FCL) · Regulation (EU) No 1178/2011 · EAR revision 25 Nov 2025

IRImplementing rule

FCL.740Validity and renewal of class and type ratings

(a)Validity

(1)The validity period of class and type ratings shall be 1 year, except for single-pilot single-engine class ratings for which the validity period shall be 2 years, unless otherwise determined in the OSD. If pilots choose to fulfil the revalidation requirements earlier than prescribed in points FCL.740.A, FCL.740.H, FCL.740.PL and FCL.740.As, the new validity period shall commence from the date of the proficiency check.

(2)Applicants for the revalidation of a class or type rating shall receive full credits for the proficiency check as required in this Subpart when they complete EBT practical assessment in accordance with Appendix 10 at an operator that has implemented EBT for the relevant class or type rating.

(b)Renewal For the renewal of a class or type rating, applicants shall comply with all of the following:

(1)in order to determine whether refresher training is necessary for the applicant to reach the level of proficiency to safely operate the aircraft, they shall undergo an assessment at one of the following:

(i)at an ATO;

(ii)at a DTO or at an ATO, if the expired rating concerned a non-high-performance SEP aeroplane class rating, a TMG class rating or a single-engine type rating for helicopters referred to in point DTO.GEN.110(a)(2)(c) of Annex VIII;

(iii)at a DTO, at an ATO or with an instructor, if the rating expired no more than 3 years ago and the rating concerned a non-high-performance SEP aeroplane class rating or a TMG class rating;

(iv)at an EBT operator that is specifically approved for such refresher training;

(2)if deemed necessary by the organisation or the instructor providing the assessment as per point (1), they shall complete refresher training at that organisation or with that instructor;

(3)after complying with point (1) and, as applicable, point (2), they shall pass a proficiency check in accordance with Appendix 9 or complete EBT practical assessment in accordance with Appendix 10. That EBT practical assessment may be combined with the refresher training specified in point (2). By way of derogation from points (b)(1), (b)(2) and (b)(3), pilots holding a flight test rating issued in accordance with point FCL.820 who were involved in the development, certification or production flight tests for an aircraft type and have completed either 50 hours of total flight time or 10 hours of flight time as PIC in test flights in that type during the year prior to the date of their application, shall be entitled to apply for the revalidation or renewal of the relevant type rating. Applicants shall be exempted from the requirement in points (b)(1) and (b)(2) if they hold a valid rating for the same class or type of aircraft on a pilot licence issued by a third country in accordance with Annex 1 to the Chicago Convention and if they are entitled to exercise the privileges of that rating.

(c)Pilots who leave an operator’s EBT programme after having failed to demonstrate an acceptable level of competence in accordance with that EBT programme shall not exercise the privileges of that type rating until they have complied with one of the following:

(1)they have completed EBT practical assessment in accordance with Appendix 10;

(2)they have passed a proficiency check in accordance with point FCL.625(c)(3) or point FCL.740(b)(3), as applicable. In such a case, point FCL.625(b)(4) and point FCL.740(a)(2) shall not apply.

IR · FCL.740 — Regulation (EU) No 1178/2011 · Regulation (EU) 2024/2076 · Aircrew Easy Access Rules · EAR revision 25 Nov 2025

AMCAcceptable means of compliance

AMC1 FCL.740(b)Validity and renewal of class and type ratings

Show the text

RENEWAL OF CLASS AND TYPE RATINGS: REFRESHER TRAINING AT AN ATO, A DTO OR WITH AN INSTRUCTOR

(a)The objective of the refresher training is for the applicant to reach the level of proficiency necessary to safely operate the relevant type or class of aircraft. The amount of refresher training needed should be determined on a case-by-case basis by the ATO, the DTO or the instructor, as applicable, taking into account the following factors:

(1)the experience of the applicant;

(2)the amount of time elapsed since the privileges of the rating were last used;

(3)the complexity of the aircraft;

(4)whether the applicant has a current rating on another aircraft type or class; and

(5)where considered necessary, the performance of the applicant during a simulated proficiency check for the rating in an FSTD or an aircraft of the relevant type or class. It should be expected that the amount of training needed to reach the desired level of proficiency will increase analogously to the time elapsed since the privileges of the rating were last used.

(b)After having determined the needs of the applicant, the ATO, the DTO or the instructor, as applicable, should develop an individual training programme based on the initial training for the rating, focusing on the aspects where the applicant has shown the greatest needs.

(c)With the exception of refresher training for ratings for aircraft referred to in point FCL.740(b)(1)(ii), refresher training should include theoretical knowledge instruction, as necessary, such as for type-specific system failures in complex aircraft. The performance of the applicant should be reviewed during the training and additional instruction should be provided to the applicant, where necessary, to reach the standard required for the proficiency check.

(d)After successful completion of the training, the ATO, the DTO or the instructor, as applicable, should issue the applicant with a training completion certificate or another document specified by the competent authority, describing the evaluation of the factors listed in (a), the training received, and a statement that the training has been successfully completed. The training completion certificate should be presented to the examiner prior to the proficiency check. Following the successful renewal of the rating, the training completion certificate or the other document specified by the competent authority and the examiner report form should be submitted to the competent authority.

(e)Taking into account the factors listed in (a) above, the ATO, the DTO or the instructor, as applicable, may also decide that the applicant already possesses the required level of proficiency and that no refresher training is necessary. In such a case, the certificate or other documental evidence referred to in (d) above should contain a respective statement including sufficient reasoning.

AMC · AMC1 FCL.740(b) — Regulation (EU) No 1178/2011 · ED Decision 2025/002/R · Aircrew Easy Access Rules · EAR revision 25 Nov 2025

GMGuidance material

GM1 FCL.740(b)Validity and renewal of class and type ratings

Show the text

RENEWAL OF CLASS AND TYPE RATINGS: REFRESHER TRAINING AT AN AOC HOLDER It is recommended that an AOC holder approved for renewal of type ratings under Part-ORO may provide refresher training if the applicant is enrolled in the EBT programme; and if the rating has lapsed by no more than 1 year. If the rating has lapsed by more than 1 year, it is recommended that the applicant consider to follow the training at an ATO and AMC1 FCL.740(b) applies.

GM · GM1 FCL.740(b) — Regulation (EU) No 1178/2011 · ED Decision 2021/002/R · Aircrew Easy Access Rules · EAR revision 25 Nov 2025

All rules in SUBPART H – CLASS AND TYPE RATINGS

Consolidated from the EASA Easy Access Rules (revision 25 Nov 2025, extracted 17 Aug 2026) for convenience. Not the official publication — verify against the Official Journal of the European Union and the EASA publications before operational use.

Ask Metis about FCL.740 →

Metis opens with Avioverse in October 2026 · request early access.