Skip to content

A gradual release of Avioverse begins in October 2026. Request early access →

CS ADR-DSN.L.540 Aiming point marking

Certification Specifications and Guidance Material for Aerodrome Design (CS-ADR-DSN) — Issue 7 · Regulation (EU) No 139/2014 · EAR revision 13 Mar 2026

IRImplementing rule

CS ADR-DSN.L.540Aiming point marking

(a)Applicability:

(1)An aiming point marking should be provided at each approach end of an instrument runway where the code number is 2, 3, or 4.

(2)An aiming point marking should be provided when additional conspicuity of the aiming point is required at each approach end of:

(i)a non-instrument runway where the code number is 3 or 4,

(ii)an instrument runway where the code number is 1.

(b)Characteristics. The aiming point marking should commence no closer to the threshold than the distance indicated in the appropriate column of Table L-1, except that, on a runway equipped with a PAPI system, the beginning of the marking should be coincident with the visual approach slope origin.

Location and dimensionsLanding distance available
Less than 800 m800 m up to but not including 1 200 m1 200 m up to but not including 2 400 m2 400 m and above
(1)(2)(3)(4)(5)
Distance from threshold to beginning of markinga150 m250 m300 m400 m
Length of stripeb30-45 m30-45 m45-60 m45-60 m
Width of stripe4 m6 m6-10 mc6-10 mc
Lateral spacing between inner sides of stripes6 md9 md18-22.5 m18-22.5 m
a Where a PAPI system is provided for the runway, the beginning of the marking should be coincident with the visual approach slope origin. b Where greater dimensions of the specified ranges are intended to be used where increased conspicuity is required. c Where lateral spacing may be varied within these limits to minimise the contamination of the marking by rubber deposits. d These figures were deduced by reference to the outer main gear wheel span which is element 2 of the aerodrome reference code

Table L-1. Location and dimensions of aiming point marking

(c)An aiming point marking should consist of two conspicuous stripes. The dimensions of the stripes and the lateral spacing between their inner sides should be in accordance with the provisions of the appropriate column of Table L-1.

IR · CS ADR-DSN.L.540 — Regulation (EU) No 139/2014 · ED Decision 2014/013/R · Aerodromes Easy Access Rules · EAR revision 13 Mar 2026

All rules in CHAPTER L — VISUAL AIDS FOR NAVIGATION (MARKINGS)

Consolidated from the EASA Easy Access Rules (revision 13 Mar 2026, extracted 17 Aug 2026) for convenience. Not the official publication — verify against the Official Journal of the European Union and the EASA publications before operational use.

Ask Metis about CS ADR-DSN.L.540 →

Metis opens with Avioverse in October 2026 · request early access.